Repair problem
Not Washing Properly Troubleshooting Guides
Published FixGraph guidance for diagnosing and responding to not washing properly.
Matching published guides
Choose a guide that matches the service, equipment, and conditions you are seeing.
-
Fisher & Paykel DD60SCTX7 DishDrawer Not Washing Properly
For a Fisher & Paykel DD60SCTX7 DishDrawer that leaves dishes dirty, start with the parts of the wash that can be observed without service access: load the drawer so the spray arm can rotate, confirm the filter plate and drain filter are seated and clean, and check that the detergent is suitable, correctly placed, and measured for the selected program. Then separate hard-water or rinse-aid symptoms from a remaining circulation, heating, water-inlet, or drawer-seal fault.
-
JennAir Dishwasher Not Washing Properly After Changing Detergent Tablets
If a JennAir dishwasher began leaving food or detergent residue after you changed tablet products, treat the tablet, dispenser, cycle, water temperature, loading, and water hardness as separate checks. JennAir recommends fresh, high-quality pre-measured tablets or packs in the main dispenser, with the lid closed, and automatic dishwasher detergent only.