Repair problem
Not Stopping Filling With Water Troubleshooting Guides
Published FixGraph guidance for diagnosing and responding to not stopping filling with water.
Matching published guides
Choose a guide that matches the service, equipment, and conditions you are seeing.
-
Amana Washer Keeps Filling With Water | Fix Guide
If an Amana washer is genuinely continuing to admit water or is filling while water leaves, stop the cycle and close both household water valves first. If water is near an outlet or electrical connection, do not touch a wet plug or area; leave the appliance disconnected only when that can be done without entering water and use qualified help if it cannot.
-
Kenmore 80 Series Washer Fills While Off: Shut Off Water Before Any Diagnosis
If a Kenmore 80 Series washer is taking in water while it is switched off, stop the water first: close both hot and cold supply valves, then disconnect power only from a dry, safe location. Do not keep the valves open to see whether the tub overfills, and do not disconnect a pressurized hose or open the cabinet.
-
Washing Machine Will Not Stop Filling With Water: Shut Off Water Safely
If a washing machine keeps filling, close both household washer water valves first to stop the incoming water. If the tub is rising, water is on the floor, or the plug or outlet is wet, keep clear of standing water and disconnect electrical power only from a safe, dry position; do not reach behind a wet machine.