Repair problem
Not Washing Troubleshooting Guides
Published FixGraph guidance for diagnosing and responding to not washing.
Matching published guides
Choose a guide that matches the service, equipment, and conditions you are seeing.
-
AEG Dishwasher not washing | Fix Guide
When an AEG dishwasher is not washing dishes cleanly, first check water access to the load rather than assume a failed pump. Load dishes so they do not block the spray arms, select a programme suited to the soil level, check the filters and sump, and clean the spray arms and door gasket with the appliance off.
-
Amana ADB1300AFS1 dishwasher F4E3: not washing and no replacement part yet
For the Amana ADB1300AFS1, Amana's official dishwasher guidance defines F4E3 as a heating error and recommends one 30-second power disconnection; if the code returns, it directs you to schedule service. That is not a confirmed wash-pump or circulation-motor diagnosis, so do not buy a replacement part from the code alone.
-
Amana NTW4516FW Won't Start Washing: Check the Fill Path and Lid Timing
The Amana NTW4516FW is a top-load washer with a dual-action agitator, late lid lock, and Deep Water Wash option. If it never reaches wash or waits a long time while filling, record the exact display or light, close the lid, verify the selector and Start action, and check from a dry position that both hot and cold valves are open and their hoses are not kinked.
-
Amana top-load washer not washing: separate start, fill and agitation problems
First decide what “not washing” means: the controls do not start, the lid does not lock, the washer does not fill, the basket or washplate does not move, or the clothes finish dirty. Amana's top-load guidance says a closed lid is required for many models to fill, wash, drain, rinse and spin, and the startup sensing sequence can include a click, a brief basket movement and pauses.
-
Frigidaire FGHD2465NF1A Dishwasher Leaves One Section Unwashed
If a Frigidaire FGHD2465NF1A leaves only one rack area or section dirty, do not start by condemning the circulation pump. First establish whether the dirty area is always the same, then correct loading and detergent-dispenser obstructions, inspect the accessible spray arms and filter/glass trap with the dishwasher off and cool, and make sure the incoming water is hot enough.
-
LG Dishwasher Not Washing | Safe Checks
First separate poor cleaning from a dishwasher that never starts or never circulates water. If the cycle runs but dishes remain dirty, LG points to large food scraps, overlapping or incorrectly oriented dishes, blocked spray nozzles, a dirty filter, unsuitable detergent or a cycle that does not match the soil level.