LG Dryer loose gas adjustment screw | Fix Guide

Use only checks that match the exact appliance or system and its official guide.

1. Check 1

   If gas is smelled, heard or suspected around the LG dryer, stop using it and clear the room, building or area of all occupants. Do not light any appliance, touch a switch or use a phone inside.

   Expected result: Gas odor, hissing, an abnormal flame report or uncertainty about the gas path is present.

   Next step: Leave immediately and call the gas supplier or fire department from outside or a neighbor's phone.

   Why this matters

   Why: This is a possible gas leak, not a condition to diagnose by touching or operating an adjustment screw.

2. Check 2

   Only if the dryer gas shutoff is plainly reachable from a safe position without moving the dryer, entering the suspected gas area or touching electrical controls, close it as directed by the gas supplier or responder. Do not approach it when doing so is unsafe.

   Expected result: The valve is safely accessible without entering a hazardous area, or reaching it would require approaching the dryer or suspected leak.

   Next step: If safely accessible, report the shutoff to the gas supplier and remain outside. If not, leave it untouched and wait for the gas supplier or emergency responder.

   Why this matters

   Why: LG identifies the individual gas valve as the shutoff point, but a shutoff instruction does not authorize unsafe re-entry or appliance movement.

3. Check 3

   From outside the building or a neighbor's location, call the local gas supplier. If the supplier cannot be reached or there is immediate danger, call the fire department or emergency services.

   Expected result: The gas supplier or emergency responder provides instructions or confirms the area is safe to approach.

   Next step: Follow those instructions exactly. Do not return to operate, inspect or test the dryer before the all-clear.

   Why this matters

   Why: The gas supplier or responder controls the emergency shutoff and re-entry decision; a homeowner cannot safely identify a loose adjustment screw from the symptom alone.

4. Check 4

   After the gas supplier has declared the area safe, give a qualified LG service agency, installer or gas supplier the complete dryer model and the event timeline. Include whether the report followed installation or LP conversion and whether any odor, hissing or abnormal flame was observed.

   Expected result: The model and history can be documented without moving or operating the dryer, or the model remains unknown.

   Next step: Keep the dryer out of service until qualified inspection. Do not open the cabinet, adjust the screw, change an orifice, test pressure or restart the dryer to reproduce the symptom.

   Why this matters

   Why: LG's gas-dryer documentation is model- and gas-type-specific. The reported screw may be misidentified, and no model-free adjustment or part fit can be inferred.