On this page
Start here
Quick answer
An Ariston dishwasher code is meaningful only when matched to the exact appliance model and display pattern. Record every character, symbol, and flashing light before switching the machine off, then use the model's Ariston manual. The official LFF8M122X troubleshooting guide, for example, treats a tap-shutoff alarm with an F6 display differently from a clogged-filter symbol and separately checks the water tap, door, plug, and cycle reset; that guide is not a universal code table for every Ariston dishwasher. Follow only the instruction for your exact model. If the code is unlisted, returns after the documented restart, water or filter check, the dishwasher leaks, or the next step requires internal access, stop and arrange authorised service.
Work through in order
Diagnostic checks
Use only checks that match the exact appliance or system and its official guide.
-
Check 1
Before pressing Reset or switching the dishwasher off, record the complete display: every letter and number, spaces, tap or filter symbol, flashing indicator, beeps, and the point in the cycle when it appeared. Note whether the door is closed and whether water is present in the tub.
Expected result: The display is a named symbol, a code such as the model guide's F6 example, a repeating light pattern, or an unrecognised message.
Next step: Keep the exact display with the model number and continue to the matching manual. Do not infer a meaning from a similar-looking code on another model.
Why this matters
Why: Ariston's guide uses the combination of code, symbol, and indicator behavior to separate water-supply and filter alarms. An incomplete transcription can lead to the wrong user action.
-
Check 2
Find the dishwasher's model number on its rating plate and select that model in Ariston's user-manual library. Confirm that the manual's control-panel layout and displayed symbols match your appliance before following a code procedure.
Expected result: The model and manual match; the model is incomplete; or the only available procedure is for another Ariston dishwasher.
Next step: Use only the matching manual. If the model label is unreadable or no matching manual is available, preserve the display and arrange authorised service rather than guessing.
Why this matters
Why: Ariston publishes manuals for multiple dishwasher models, and display meanings and button sequences can differ. A procedure from another model is not reliable identity evidence.
-
Check 3
For a code or alarm connected to water intake, check the accessible water tap is open and the inlet hose is not visibly bent. If the door was opened or the cycle was paused, close the door and use the matching Start or Pause control from the manual; do not loosen hose connections.
Expected result: The tap is closed, the inlet hose is bent, the door was open or the cycle was paused, or water and door conditions are normal.
Next step: Correct only an obvious accessible tap, hose-routing, or door-state condition and run the model's prescribed restart. If the alarm returns or water leaks, stop and arrange service.
Why this matters
Why: In the opened Ariston guide, a tap-shutoff alarm can be caused by absent water supply or a bent inlet hose, and an interrupted cycle can wait for the door to close or the cycle to be restarted. Normal external conditions do not rule out an internal inlet or control fault.
-
Check 4
If the display shows a filter symbol or the cycle stops with water remaining, wait until the cycle has ended, switch the appliance off, and clean only the accessible cup and stainless-steel filters as the model manual instructs. Inspect the visible drain path for a blockage without reaching into the pump protection or dismantling the appliance.
Expected result: The filter is clogged or loose; water remains and the accessible drain path is blocked; the filter is clean and secure; or the display returns after the next cycle.
Next step: Reinstall the filters correctly and run only the model-approved verification cycle. If the symbol or water-removal problem returns, stop before internal pump or wiring work and arrange authorised service.
Why this matters
Why: Ariston's opened guide links its filter alarm to cleaning the cup and stainless-steel filters and identifies a blocked drain duct or food-residue filter as a no-drain cause. A clean filter does not prove the pump or control is sound.
-
Check 5
After the exact model checks are complete, use the manual's documented ON/OFF or Reset restart once. For the opened LFF8M122X guide, switching the appliance off and back on after about one minute resets the cycle; other models may use different controls.
Expected result: The code clears and the dishwasher completes a normal cycle; the code clears only temporarily; or the same code or indicator returns.
Next step: Do not repeat resets or order a valve, pump, sensor, or control from the display alone. Record the model, code, checks, and restart result, then contact authorised service.
Why this matters
Why: A successful restart is consistent with a transient interruption or corrected user condition, but it does not identify or rule out an internal component. A returning code requires model-specific diagnosis.
Use your observations
Decision map
Find the observation that best matches what you see, then follow the next safe action.
-
PATH 01Next step
What you see
The exact model manual identifies a water or tap alarm, and the accessible tap was closed or the inlet hose was visibly bent; the alarm clears after the documented restart.
Do this next
Run one model-approved cycle while watching for leaks or a returning alarm. Escalate if the alarm returns or water cannot be supplied safely.
Why this path and its safety boundary
Why it matters: The observed water-supply condition is more likely than an unconfirmed internal control failure.
-
PATH 02Next step
What you see
The display is a filter symbol, and the accessible cup or stainless-steel filters contain residue or were not seated correctly; the indicator clears on the following cycle.
Do this next
Keep the filters clean and correctly installed. Arrange service if water remains, the symbol returns, or the accessible drain path is clear.
Why this path and its safety boundary
Why it matters: The guide's filter condition is a plausible cause of the indicator, but clearing the symbol does not prove that the drain system is fully healthy.
-
PATH 03Next step
What you see
The door was opened or power was interrupted, and the matching manual says the cycle should resume after the door is shut or power is restored; no code returns.
Do this next
Complete the manual's restart or Start/Pause action once and monitor the cycle. Do not assume a different model uses the same button sequence.
Why this path and its safety boundary
Why it matters: The observed behavior is consistent with an interrupted cycle rather than a confirmed component failure.
-
PATH 04Next step
What you see
The code is unlisted for the exact model, returns after the matching water, filter, door, and restart checks, or the dishwasher leaks or needs internal access.
Do this next
Stop troubleshooting and arrange authorised Ariston service. Provide the complete model, exact display, cycle stage, and checks already performed.
Why this path and its safety boundary
Why it matters: The available user-level evidence is insufficient to assign one valve, pump, sensor, control, or wiring fault safely.
Helpful context
Understand the symptom
The display pattern is part of the fault
Write down the complete code, symbol, and flashing-light pattern before resetting anything. Ariston's LFF8M122X guide distinguishes a tap-shutoff alarm, where H2O and a tap symbol appear and F6 follows, from a filter symbol that calls for filter cleaning. Those observations cannot be safely merged into one generic Ariston code meaning.
Confirm the exact model before using a sequence
Ariston's manual library lists several dishwasher models, and the opened troubleshooting guide is identified by the LFF8M122X manual file. Use the model number on the rating plate to select the matching manual. If a different model uses another display or button layout, do not copy the LFF8M122X procedure.
Resetting is a verification step
The opened Ariston guide allows a restart or cycle reset for the covered model, but it also directs the owner to correct water, door, filter, or drain conditions and to contact authorised assistance when the problem persists. A code that returns after the matching user step is an escalation signal, not proof of one replaceable part.
When checks do not resolve it
Need a professional?
The complete code or symbol is absent from the matching model manual., The code returns after the documented water, filter, door, or restart check., A leak, persistent no-fill or no-drain symptom, or internal access is involved.
Have this ready
- The complete Ariston dishwasher model and serial information from the rating plate.
- The exact code, symbol, flashing pattern, beeps, and cycle stage.
- Whether the tap, inlet hose, door, filters, and accessible drain path were checked and what changed after restart.
Common questions
FAQ
Are Ariston dishwasher error codes the same on every model?
No. Ariston's official manual library lists multiple dishwasher models, and the opened troubleshooting PDF is for the LFF8M122X model. Match the complete display and control panel to the exact manual before using a code or reset procedure.
What does an Ariston dishwasher tap alarm with F6 mean?
In the opened LFF8M122X guide, a tap-shutoff alarm displays H2O and a tap symbol, with F6 appearing after a few seconds. The guide checks the water supply and a bent inlet hose, then describes a model-specific restart. Do not assume F6 has the same meaning on another Ariston model.
What should I do when the Ariston dishwasher filter symbol is lit?
For the covered model, Ariston says to wait until the wash cycle has ended, open the door, and clean the cup and stainless-steel filters. Reinstall them correctly and verify the next cycle. If the indicator or water-removal problem returns, arrange service.
Can opening the door or a power cut cause an Ariston code or stopped cycle?
The opened Ariston guide says an opened door or power cut can interrupt a cycle, which may continue after the door is shut or power is restored. Follow the exact model's Start or Reset procedure and escalate if a code returns or the cycle does not resume normally.
Should I replace a pump or control board from an Ariston error code?
No. A code narrows the monitored condition but does not establish a compatible replacement part. Ariston's professional Quick Fix material is intended for registered installers, and the homeowner boundary is the model manual's user-level checks; persistent or unlisted faults need authorised service.
Read the exact guide
Official sources
- User Manuals – Ariston Brand – Cooking Appliances, Kitchen Appliances, DishwashersAriston · Model-library scope and exact dishwasher manual selection
- QuickFixAriston · Professional-only product-error documentation, exploded views, spare-part lists, and technical notes
- TroubleshootingAriston · Model-specific dishwasher start, water-supply, filter, drain, noise, tap-shutoff F6, filter-symbol, and authorised-service guidance
Community feedback
Share a repair observation
Share a plain-text repair observation. Accepted observations are published automatically; this page may take a moment to update.