Repair problem
Keeps Running Troubleshooting Guides
Published FixGraph guidance for diagnosing and responding to keeps running.
Matching published guides
Choose a guide that matches the service, equipment, and conditions you are seeing.
-
American Standard Toilet Fill Valve Keeps Running: What to Check and What to Do Next
If an American Standard toilet fill valve keeps running, first determine whether water is entering the tank continuously, spilling into the overflow tube, or leaking from the tank through the flush seal. Close the toilet supply valve if the bowl is rising or the valve will not shut off.
-
American Standard Toilet Flapper Keeps Running: What to Check and What to Do Next
If an American Standard toilet keeps running, first watch whether water is leaking past the flapper into the bowl or whether the tank never stops refilling. Check that the flapper sits flat, the chain or trip lever is not holding it open, and the tank water reaches the exact model's fill mark without rising into the overflow.
-
American standard toilet flush valve chain keeps running: What to Check and What to Do Next
When an American Standard toilet with a flush valve chain keeps running, first identify whether water is continuously entering the bowl or only refilling into the overflow. A chain that is tangled, too tight, caught under the trip lever, or holding the flapper open can prevent the flush valve from reseating; a worn or dirty flapper seal can leak even when the chain moves freely.
-
American Standard toilet keeps running: What to Check and What to Do Next
An American Standard toilet that keeps running is usually allowing water to pass into the bowl or is failing to shut off the fill valve. First confirm whether water is entering the bowl through the flush valve or rising in the tank and overflow tube, then check the tank waterline, handle or chain movement, and the model-specific flapper or seal.
-
Glacier bay toilet fill valve keeps running: What to Check and What to Do Next
A Glacier Bay toilet that keeps running is not always a failed fill valve. Remove the tank lid and compare the water with the marked waterline on the flush-valve overflow tube.
-
Glacier Bay Toilet Keeps Running: What to Check and What to Do Next
A Glacier Bay toilet that keeps running is usually losing tank water into the bowl or sending water into the overflow tube. Close the accessible angle stop gently if the flow is wasting water, then observe the tank and bowl without flushing repeatedly.
-
Kohler toilet keeps running: What to Check and What to Do Next
A Kohler toilet that keeps running is usually either losing tank water into the bowl or failing to shut off before water reaches the overflow. Remove the tank lid and watch the path: check whether the flapper or canister seal closes, the trip-lever chain has slight slack, the fill valve stops, the float moves freely, and the water level stays below the overflow.
-
Toilet keeps running water continues into bowl: What to Check and What to Do Next
When water continues into the toilet bowl, first prevent waste and an overflow by turning the toilet's supply stop clockwise only until it stops if the valve is accessible and operable. Remove the tank lid and observe whether water is leaking past the flapper or canister seal, entering the overflow tube, or siphoning through a refill hose that sits below the tank waterline.
-
Toilet keeps running and tank level fluctuates: What to Check and What to Do Next
A running toilet whose tank level rises and falls is usually either losing water into the bowl through the flapper/flush-valve seal or failing to shut off at the fill valve. Remove the tank lid carefully and watch one refill cycle: water that reaches or enters the overflow points toward fill-level or fill-valve trouble, while a normal-looking level followed by a slow drop and automatic refill points toward a flush-valve seal, flapper, chain, or seat leak.
-
Toilet keeps running shutoff works: What to Check and What to Do Next
When the toilet shut-off works but the toilet keeps running, first close the valve to stop wasted water while you identify whether water is leaking from the tank through the flapper or flush-valve seal, rising into the overflow because the float is too high, or entering through a fill valve that will not shut off. With the tank lid off, watch the water level, press the flapper briefly, and check the chain, refill tube, and fill-valve behavior.
-
Toilet keeps running: What to Check and What to Do Next
A toilet that keeps refilling or makes a steady hiss usually has water passing from the tank into the bowl, a flush handle or chain that is not returning, or a fill control that is not stopping at the normal level. Start with external sound, water-surface, handle, tank, and nearby-fixture observations.
-
TOTO toilet keeps running: What to Check and What to Do Next
A TOTO toilet that keeps running is usually either still refilling after a flush, sending water from the tank into the bowl through a flush-valve seal or overflow path, or operating a model-specific electronic water cycle. First close the visible toilet shutoff if water is continuous or the bowl is rising, then observe from a dry position whether water enters the tank, trickles into the bowl, or comes from a supply connection.