Repair problem
Drum Scraping Troubleshooting Guides
Published FixGraph guidance for diagnosing and responding to drum scraping.
Matching published guides
Choose a guide that matches the service, equipment, and conditions you are seeing.
-
Amana dryer drum scraping: What to Check and What to Do Next
Turn the Amana dryer off before investigating a scraping sound. Amana's direct scraping guidance says coins, paper clips, safety pins, screws, nails, or other small hardware can lodge where the drum meets the front or rear; inspect those seams and remove only a loose object that is plainly accessible.
-
Bosch dryer drum scraping: What to Check and What to Do Next
A Bosch dryer drum that scrapes needs to be stopped and localized before another load is run. With the dryer cool and power isolated, check the drum opening and door seal for a coin, zipper, bra wire, or other loose object, and note whether the sound is present when the empty drum is moved gently only as the exact manual permits.
-
Dryer drum scraping follows rotation: What to Check and What to Do Next
A scraping sound that repeats with dryer-drum rotation usually comes from an object caught where the drum meets the front or rear, a loose or worn drum slide, a support or roller problem, or a loose baffle or seal. Stop the dryer, disconnect power using the normal plug or approved disconnect, and inspect only the empty drum and accessible edges for coins, screws, clips, or other objects.
-
Dryer drum scraping is visibly misaligned: What to Check and What to Do Next
Stop the dryer, remove the load, and disconnect power before inspecting a drum that is visibly off-center or scraping. Do not run another cycle to see whether it settles.
-
Dryer drum scraping no smoke: What to Check and What to Do Next
No smoke is a useful observation, but it does not make a scraping dryer safe to keep running. Stop the cycle, disconnect power as the owner's instructions allow, and inspect only the drum opening, front and rear drum edges, lint-filter area, and surrounding floor for a coin, fastener, zipper, or other loose object.
-
Dryer drum scraping: What to Check and What to Do Next
A dryer drum that scrapes or makes metal-on-metal noise should not be kept running. First turn it off, unload it when safe, and look from the door at the front and rear drum edges for a plainly visible object; do not reach into a seam or dismantle the dryer.
-
Electrolux Dryer Drum Scraping: What to Check and What to Do Next
Stop an Electrolux dryer that is scraping and remove the load before the noise damages clothing or the appliance. Check pockets, belt buckles, zippers, and the drum for coins or another loose object; Electrolux identifies metal fasteners and foreign objects as common sources of rattling or clanking.
-
Frigidaire dryer drum scraping: What to Check and What to Do Next
A Frigidaire dryer drum that scrapes may have a coin, fastener, or other object caught in or around the drum, clothing hardware striking the drum, a loose pedestal or unlevel installation, or an internal support, belt, roller, bearing, idler, or blower problem. Stop the dryer, remove the load, and inspect only the ordinary-access drum and door area; do not reach into the cabinet.
-
GE dryer drum scraping: What to Check and What to Do Next
Stop the GE dryer and wait until the drum is completely stationary and cool enough to approach. GE says coins, paper clips, buttons, or zippers can scrape or rattle in the drum, while an object at the drum front seal or worn or loose drum slides can create metal scraping that needs service.
-
Kenmore dryer drum scraping: What to Check and What to Do Next
Stop the Kenmore dryer and remove the load. With power disconnected, inspect the front and rear drum seams for a coin, screw, zipper, or other small object, then gently turn the empty drum by hand.
-
LG dryer drum scraping: What to Check and What to Do Next
A sharp metallic scraping sound from an LG dryer can come from a foreign object such as a coin or zipper, but a scrape that continues through the cycle can indicate a worn roller, belt, loose drum shaft, hardened lubricant, or another internal part. Empty the pockets, remove the load, and inspect the drum opening for an accessible object or damage.
-
Maytag Dryer Drum Scraping: What to Check and What to Do Next
A Maytag dryer drum that scrapes should be stopped before the sound damages the drum or another component. With the dryer off and empty, inspect the visible front and rear edges where the drum meets the cabinet for a coin, paper clip, safety pin, screw, nail, button, or other small hardware.
-
Samsung dryer drum scraping: What to Check and What to Do Next
A Samsung dryer drum that scrapes may be contacting a coin, button, pen, zipper, or other loose object; a heavy or uneven load can also create rubbing, grinding, or vibration. An unlevel dryer, loose pedestal or vent, or a worn internal rotating part is possible when the sound persists without laundry.
-
Whirlpool Dryer Drum Scraping: What to Check and What to Do Next
Turn the Whirlpool dryer off before investigating a scraping sound. From the open doorway, inspect the visible front and rear edges where the drum meets the cabinet for a coin, paper clip, safety pin, screw, nail, or other small item caught in the seam; remove only a loose object that is plainly reachable without tools or force.