Repair problem
Not Powering On Troubleshooting Guides
Published FixGraph guidance for diagnosing and responding to not powering on.
Matching published guides
Choose a guide that matches the service, equipment, and conditions you are seeing.
-
AEG TR718L4B Quick Dry stops and goes dead: check power, cycle state, and tank before service
If an AEG TR718L4B 7000 8 kg heat-pump dryer goes dead during a programme labelled Quick Dry, first decide whether power was actually lost or the programme ended and the display entered a normal standby state. Record whether the display is completely dark, whether the outlet and RCD/breaker still hold, and whether the cycle stopped with a tank, filter, delay, child-lock, door, or other indicator.
-
Beko DFN05X11S Dishwasher Dead After Adding Salt: Separate Spill From Power Fault
The timing after adding salt does not prove that salt caused a completely dark Beko DFN05X11S. Beko's UK product page lists DFN05X11S as the silver DFN05X11 dishwasher, and the matching manual lists household power, the appliance fuse, water supply, the door, and the On/Off control as separate reasons a machine may not start.
-
Coffee Maker Won't Power On: Is the Capacitor the Problem?
A capacitor cannot be identified as the cause of a coffee maker that will not power on from the symptom alone, and a board photo is not enough to select or replace one. Start with the accessible power path: confirm the cord is seated, test the outlet with another suitable appliance, check a tripped breaker or GFCI from a dry position, and use only the visible power or standby control described by the exact manual.
-
Dryer Won’t Power On After Moving to a New House
After a move, separate a dryer that has no lights or response from one that has power but will not start. Keep it unplugged if the plug, cord, receptacle, or installation looks damaged or incorrectly wired; reset the new home's dryer breaker fully once, and use the exact model manual to confirm whether it is an electric or gas dryer and what supply it requires.
-
GE GTD65EBSJ0WS Dryer Has No Power After Repeated Repairs
For the electric GE GTD65EBSJ0WS, a dark panel after three repairs in six months calls for a documented repair-or-replace decision, not another blind part swap. First check the dedicated breaker once, the accessible plug and outlet, and any external scorch, looseness, fraying, smoke, or burning smell; do not open the terminal area or bypass a door or thermal safety device.
-
GE JES1072SH1SS Sparks and Then Loses Power While Microwaving
Treat a GE JES1072SH1SS that sparked and then went dead as a stop-use event, not as a normal no-start reset. GE's official pages document a closely matching JES1072SHSS countertop model, but the assigned string includes an extra '1', so photograph the rating label and confirm the complete model before using its manual; do not silently substitute the near-match.
-
KitchenAid KCGS356ESS Has No Power: Check the Ignition Supply
The KitchenAid KCGS356ESS is a gas cooktop with electronic ignition, so a loss of electrical power can explain why no burner clicks even though the appliance uses gas for cooking. KitchenAid's model specification rates it at 120 V and 15 A.
-
KitchenAid KODC304EWH Oven Has No Power: Safe External Checks
For a KitchenAid KODC304EWH that appears dead, first distinguish a blank display from a locked, delayed, demo or energy-saving control state, then check the household oven breaker or fuse. If the failure followed an outage and F9/F9 E0 appears, KitchenAid calls for a one-minute breaker reset and electrical verification if the code returns.
-
KitchenAid KUIX305ESS Ice Maker Has No Lights but Makes a Low Hum
If a KitchenAid KUIX305ESS has no visible lights but makes a low rumbling sound, treat the sound as evidence that some part of the appliance may still be energized, not as proof that the wall supply or a pump is good. First confirm the exact model and observe whether any normal control responds, then make only external checks of the plug, outlet or breaker/GFCI status, visible water and drain lines, front ventilation, and room conditions.
-
KitchenAid YKHMS147H Microwave Hood Combination Has No Power
Treat a completely dark KitchenAid YKHMS147H as a power-path question first, not as proof of a failed high-voltage part. This is an older microwave hood combination, and KitchenAid's official dimension sheet identifies the related KHMS147H as a microwave hood combination while not listing the Y prefix; confirm the exact rating-label model and market before applying model-specific instructions.
-
LG Dryer Won't Power On: Check the Power Path Before Blaming the Button
A technician's opinion that the power button is broken is not enough to identify the cause of an LG dryer that will not start. First separate a dead dryer from a powered dryer with an unresponsive control: check the drum light and display, verify the outlet and cord from the outside, and check the dryer breaker once.
-
LG LDT7797ST Dishwasher Popped Then Lost Power
Treat an LG LDT7797ST dishwasher that made popping sounds and then went dead as an unsafe stop condition. Do not press Start, reconnect it repeatedly, or keep resetting the circuit.
-
LG LMV2031ST Microwave Will Not Power On: Safe Checks
For an LG LMV2031ST that appears dead, begin with the visible power path: check whether the display is merely in an energy-saving state, confirm the cord is firmly in the grounded wall outlet, and check a GFCI or the microwave circuit breaker once. LG's no-power guidance says a working test device at the outlet with a still-dead microwave points to service.
-
Magic Chef Refrigerator Seems to Have No Power: Safe Checks
For a Magic Chef refrigerator that seems to have no electricity, start with the safe external power path: note whether the interior light, display, or compressor sound is actually absent, inspect the accessible plug and cord, and check the outlet or breaker only when there is no heat, water, scorching, looseness, or other hazard. A damaged or hot connection, repeated breaker trip, shock, smoke, or burning odor is a stop condition.
-
Maytag MED5630HC Won't Power On After a Whole-Home Power Surge
Treat a Maytag MED5630HC that is completely dead after a whole-home power surge as an electrical stop condition, not as an ordinary Start-button problem. This exact model is a 7.3 cu.
-
Maytag MEW7530AS has no power during or after Self-Clean
The Maytag MEW7530AS is a 30-inch electric wall oven, so a blank display after Self-Clean is not a normal reason to force the door or keep resetting the breaker. Maytag says a self-clean door remains locked until the oven cools, and that an interrupted self-clean cycle may require the documented Cancel/Off or one power reset; the exact MEW7530AS page should be used for the model literature.
-
Maytag MMV4205DS-0 Microwave Has No Power: Safe Fuse and No-Start Checks
If the Maytag MMV4205DS-0 microwave has no display or will not power on, check only the external supply and controls from a safe position. Verify the grounded outlet and household breaker or fuse once; if power trips again, disconnect the microwave and arrange service.
-
Panasonic Genius 1200W Microwave Trips the Breaker When Plugged In
If a Panasonic microwave described only as a Genius 1200W trips the household breaker as soon as it is plugged in, stop trying to power it and do not start the popcorn cycle. The supplied label is not a complete model number: Panasonic's manual lookup requires the model number, and its official product page shows that Genius Sensor 1200W branding is used on a specific model, so do not borrow that model's manual or electrical rating.
-
Panasonic NN-SN73S Has No Power After Door Repair
If a Panasonic NN-SN73S went completely dead after door work, separate an external power problem from a door-related safety problem before assuming an internal part failed. With the microwave unplugged or switched off only from a safe accessible wall position, confirm the cord and dedicated outlet, check the breaker without repeatedly resetting it, and inspect the closed door, latch, hinges, and sealing surfaces for visible damage or obstruction.
-
Samsung NE58F9710WS Dead After Self-Clean: Cool, Check Power, Then Stop
For a Samsung NE58F9710WS that goes completely dead after Self Clean, first leave the range undisturbed until it is fully cool and the door lock has released normally. Then, from a dry and safe position, check the visible range breaker or disconnect once and record whether the cooktop, display, and oven light respond.
-
Whirlpool WMH53521HZ Went Completely Dark After Cooktop Bulb Replacement
If the Whirlpool WMH53521HZ became completely dark immediately after changing the cooktop light, stop replacing parts and separate the external supply from an internal microwave fault. From a dry, safe position, confirm the cord is seated and the wall outlet is operational, then check the microwave's breaker or fuse once.