Repair problem
Not Igniting Troubleshooting Guides
Published FixGraph guidance for diagnosing and responding to not igniting.
Matching published guides
Choose a guide that matches the service, equipment, and conditions you are seeing.
-
Admiral Oven Not Igniting: Safe Checks and Next Steps
If an Admiral gas oven will not ignite, first rule out a gas or electrical hazard, then note whether the cooktop burners work, whether the display and controls respond, and whether the oven clicks or sparks. Check only visible controls, a fully closed door, control-lock or delayed-start settings, a safe visible gas shutoff, and a normal grounded outlet.
-
AEG oven not igniting: separate gas ignition from electric no-heat faults
First identify whether this is a gas AEG oven or a conventional/electric oven described as not igniting. For a gas cooker, distinguish no spark, spark with no flame, and a flame that goes out; turn the control off promptly after a failed attempt and stop immediately for gas odor.
-
Amana gas dryer not igniting: verify heat, airflow, and the gas supply before service
First confirm the symptom on a heated timed cycle: run the empty Amana gas dryer for about five minutes, stop it, and check for warmth only after the drum stops. Air Only or Air Fluff never adds heat.
-
Amana Gas Oven Not Igniting: Check Power, Gas Supply, and the Ignition Path
For an Amana gas oven that will not ignite, first make sure there is no gas smell or other emergency. Then check that the oven door is fully closed, the oven bottom is not covered with foil or a liner, the range has power from a grounded outlet, and the main gas valve is on.
-
Amana Oven Not Igniting: Safe Checks Before Service
If an Amana gas oven is not igniting, first note whether the control responds, the igniter clicks, the cooktop works, and the oven was recently installed or reconnected. Check only the normal oven setting, a fully closed door, accessible external signs of power, and whether the main gas supply is visibly available; do not remove panels, adjust the regulator, or repeatedly try to ignite a burner.
-
Beko Oven Not Igniting: Separate Gas Ignition, Power, and Control Faults
First identify whether the Beko oven is gas or electric and whether there is no display, no ignition click, clicking without a flame, or a flame that will not remain lit. For a gas model, no click points toward electrical ignition power, while clicking without ignition can indicate a gas-supply or burner-area problem; stop using it if gas is suspected.
-
Belling Oven Not Igniting: Safe Gas, Timer, and Spark Checks
If a Belling gas oven will not ignite, turn the control back to off and stop immediately if you smell unburned gas. When there is no gas odor and the appliance is safe, confirm that the cooker is switched on, the clock or timer is ready for cooking, and the correct oven function is selected.
-
Bosch Dryer Not Igniting: Safe Checks Before Service
First confirm the exact Bosch model and whether the dryer is gas or electric: an electric dryer has no burner to ignite. If it is a gas model, do not try to light the burner, open a gas connection, or test for a leak with a flame.
-
Bosch Oven Not Igniting: Safe Gas-Oven Checks
For a Bosch gas oven that is not igniting, first confirm the oven has electrical power, the control is set for the intended bake or broil operation, and the gas supply is available without testing with an open flame. During one model-correct start attempt, note whether you hear ignition sparking or see a burner flame.
-
Cooktop Not Igniting: Confirm Gas Operation, Spark, and Burner Setup
"Not igniting" applies to a gas cooktop; radiant electric and induction cooktops do not create a gas flame, so their equivalent symptom is a zone not heating. First confirm the energy type and model.
-
Delonghi Oven Not Igniting
If a DeLonghi oven is not igniting, first establish whether it is an electric oven that is not powering or heating, or a gas model whose burner will not light. Check the mains plug, outlet, and isolation switch as DeLonghi's oven guidance directs, then confirm the timer, control, and heating programme are selected according to the model manual.
-
Electrolux Dryer Not Igniting
First confirm that this is a gas Electrolux dryer and that the drum runs but no heat is produced. Stop immediately for gas odor, smoke, an unusual flame, a hot electrical connection, or repeated failed ignition.
-
Electrolux Oven Not Igniting: Check the Gas, Spark, Controls, and Safety Device
If an Electrolux gas oven is not igniting, first separate no power or no spark from a burner that sparks but does not light, and from a flame that lights then goes out. Confirm the exact model and use its manual for the required oven function, temperature, clock, and ignition sequence; do not guess at a manual-lighting method.
-
Frigidaire Cooktop Not Igniting: Safe Burner, Port, and Gas Checks
First determine whether every burner or only one is affected and whether you hear clicking. Set the affected control to the model’s Lite position only when there is no gas odor, then turn it off if the burner does not light.
-
Frigidaire Gas Oven Not Igniting
If a Frigidaire gas oven is not igniting, first confirm that Bake is selected correctly, the controls are not locked, and no error is displayed. Check the gas shutoff and the behavior of another gas burner only when both are safely accessible and there is no gas odor; never open a fitting or remove a panel.
-
Frigidaire Oven Not Igniting
If a Frigidaire gas oven does not ignite, turn the control to OFF and first check the safety basics from outside the appliance: the gas supply is available, the power cord is connected, the clock and cooking function are set, and there is no gas odor.
-
Gas Cooktop Not Igniting: Check Supply, Spark, and Burner Alignment Safely
If a gas cooktop will not ignite, turn the affected knob fully off first and identify whether you hear clicking, see a spark, smell unburned gas, or have no gas at any burner. A brief click and spark while a knob is in the ignition position can be normal, but a burner that does not light must not be left allowing gas to flow.
-
Gas oven not igniting: separate power, gas supply, and ignition faults safely
If a gas oven will not ignite, first record the model, display or error, selected mode, and whether the controls respond. A gas oven still needs a safe electrical supply for its controls and ignition, and the oven can be affected by a wider gas-supply interruption, a mode or door condition, an ignitor, a valve, a control, or a safety fault.
-
GE Cooktop Not Igniting: Check Clicks, Burner Setup, and Power Safely
If a GE gas cooktop will not ignite, first make sure there is no gas odor. If you smell unburned gas, stop and leave rather than trying another burner.
-
GE Gas Oven Not Igniting: Safe Checks Before Service
A GE gas oven that will not ignite usually needs one of a few checks: confirm Bake or Broil is selected correctly, verify the range has electrical power and gas supply, and observe whether the oven's glow-bar igniter becomes visibly hot. If there is any smell of unburned gas, do not keep trying to ignite the oven, use a flame, or operate electrical controls; leave the area and contact the gas utility or emergency service from a safe location.
-
GE Oven Not Igniting: Safe Gas and Ignition Checks
If a GE gas oven does not ignite, stop trying immediately if you smell unburned gas, hear a boom, see the door move, or notice a delayed ignition. Do not operate electrical switches or use a flame; leave the area and contact the gas supplier or emergency services from outside.
-
Hotpoint washing machine not igniting: clarify the no-start symptom safely
A standard Hotpoint washing machine does not have a burner ignition step, so “not igniting” usually means that it will not start, fill, agitate, or spin. First identify which stage is missing: a blank display or no response suggests power or controls; a lit display with no water suggests the supply, inlet path, lid or door condition, or a model-specific timeout; filling without movement points to a start, lid/door, motor, or control issue.
-
JennAir Oven Not Igniting
First confirm that this is a JennAir gas or dual-fuel oven; an electric oven does not use a gas igniter and needs its own manual. Record the model, selected mode, whether the display and cooktop work, and whether the oven clicks, shows a spark, produces a flame, or stays silent.
-
Kenmore Dryer Not Igniting
Confirm first that this is a gas Kenmore dryer that runs or starts but has no heat, not an electric dryer or a no-start problem. Select a heat-producing dry cycle rather than air-only or cool-down, check that the external gas shutoff is open and that the dryer has its required grounded power, and make sure the front and exhaust path are not obstructed.
-
Kenmore Gas Oven Not Igniting: Identify the Ignition Type and Stop Safely
A Kenmore gas oven that will not ignite needs a safe distinction between a spark-electrode model and a glow-igniter model; the brand alone does not identify the design. If gas odor is present, a burner lights late, a flare or whoosh occurs, smoke appears, or a flame is abnormal, stop immediately: do not use electrical controls or flames, do not open the door to investigate, and leave to contact the gas supplier or emergency services from a safe location.
-
KitchenAid Cooktop Not Igniting
For a KitchenAid gas cooktop that will not ignite, first stop if you smell unburned gas. If there is no gas odor and the surface is cool, determine whether one burner or all burners fail.
-
Kitchenaid Gas Cooktop Not Igniting: Safe Checks Before Service
If a KitchenAid gas cooktop will not ignite, first turn the affected knob Off and stop immediately if you smell gas, see an uncontrolled flame, or hear gas without ignition. If there is no gas odor, check whether the igniter clicks, let a recently cleaned or spilled-on burner dry, and make sure the burner cap and base are clean, correctly matched, and seated.
-
KitchenAid Gas Oven Not Igniting: Safe Checks Before Service
If a KitchenAid gas oven will not ignite, first stop for gas odor, delayed ignition, a bang, abnormal flame, smoke, soot, a burning smell, or a carbon-monoxide alarm; leave the area for a suspected gas or combustion emergency and do not keep trying.
-
KitchenAid Oven Not Igniting: Check Fuel, Power, and Ignition Safely
First confirm that this is a KitchenAid gas or dual-fuel oven and identify whether the control is completely dead, the oven accepts Bake but never produces a flame, or ignition begins and then fails. With the oven cool and no gas odor, check the grounded outlet, the oven's control state, the closed door, and the accessible gas shutoff; use only the settings and model-specific instructions in the owner's manual.
-
LG Gas Oven Not Igniting: Safe Checks for Power, Gas, and Ignition
First distinguish an LG gas oven that has no display or no control response from one that has power but fails to light. With no gas odor, smoke, abnormal flame, carbon-monoxide warning, or electrical hazard, confirm the selected bake setting and Start, check the accessible breaker once, and use the exact LG manual for the gas valve and ignition sequence.
-
Maytag Gas Oven Not Igniting: Check the Safe Causes First
If a Maytag gas oven does not ignite, first stop if you smell raw gas, hear hissing, see smoke or an abnormal flame, hear a bang, or suspect carbon monoxide. Do not keep trying to light it, use a match, remove the burner, or open the control area.
-
Maytag Oven Not Igniting: Separate Gas Ignition from an Electric No-Heat Fault
The phrase Maytag oven not igniting normally applies to a gas or dual-fuel oven; an electric oven has no gas ignition sequence and should be diagnosed as a no-heat problem instead. First record the exact model, fuel type, display, selected cycle, and whether the surface burners work.
-
Miele Cooktop Not Igniting
If a Miele gas cooktop will not ignite, first distinguish a burner that clicks from one with no spark, then let any spilled burner dry and check the cap, head, and flame openings for correct assembly or blockage. With the controls off and no gas odor, verify the cooktop has power and the gas supply is available without opening fittings.
-
Monogram Oven Not Igniting: Separate Gas Ignition from Electrical No-Heat Faults
First identify whether the Monogram appliance is a gas, electric, or dual-fuel oven and whether it has no power, no heat, or a gas oven that never establishes ignition. For a gas model, check the selected mode, household power, gas shutoff state, self-clean latch, and any model-approved visual igniter indication without manually lighting the oven or opening panels.
-
Oven not igniting: safe checks for a gas model
First confirm that this is a gas oven and separate no power, no start command, no gas or ignition response, and delayed ignition. If you smell gas, hear a delayed bang, see an abnormal flame, smoke, soot, arcing, or a carbon-monoxide alarm, turn the control off only if safe, leave the area, and contact gas or emergency help from outside; do not use a match, test for a leak, or retry the oven.
-
Samsung Cooktop Not Igniting: Choose the Right Safe Check
First identify whether your Samsung cooktop is gas, radiant electric, or induction; the word igniting applies directly to a gas burner, while electric and induction elements use power and cookware detection instead. For a gas burner, turn every knob off, let the surface cool, then confirm the burner head and cap are clean, correctly seated, and dry.
-
Samsung Dryer Not Igniting: Confirm Fuel Type, Airflow and Safe Heat
First confirm that the Samsung dryer is actually a gas model. Electric and heat-pump dryers do not have a gas burner or igniter, so a no-heat complaint on those models follows a power, cycle, airflow or heater path instead.
-
Samsung Gas Oven Not Igniting
First confirm that this is a Samsung gas oven and distinguish a normal ignition sequence from a failed one. With the room free of a gas smell, smoke, or unusual heat, record whether the display works, whether Bake or Broil is accepted, and whether the surface burners ignite.
-
Samsung Induction Cooktop Not Igniting: It Uses Pan Detection, Not a Flame
A Samsung induction cooktop does not ignite a flame: it heats a compatible magnetic pan through an induction field. If the user-facing symptom is “not igniting,” first check whether the cooktop powers on, whether Control Lock or moisture is preventing input, and whether a flat magnetic pan is centered and large enough for the selected zone.
-
Samsung Oven Not Igniting: Check the Controls, Gas Supply, and Ignition Sequence
First determine whether this is a gas Samsung oven and whether the display, controls, and cooktop have power. A gas oven may fail to ignite because the control sequence, door state, gas supply, or igniter is not ready, while electric models do not use a gas burner ignition system.
-
Siemens Oven Not Igniting: Check Fuel Type, Controls, and Safe Ignition Signs
First confirm that the Siemens appliance is a gas oven or gas-combination cooker; an electric or induction oven has no gas burner to ignite. Record the full model identifier, fuel type, selected function, and whether you hear a click, see a spark, smell gas, or get no ignition response.
-
Thermador Cooktop Not Igniting: Dry and Re-seat the Burner Safely
For a Thermador gas cooktop that will not ignite, first stop if you smell unburned gas, hear gas escaping, see a flare-up or delayed ignition, or the igniters continue clicking after every control is OFF. Turn the controls off, leave the area without operating switches or appliances, and contact the gas supplier or emergency help from outside.
-
Thermador Gas Cooktop Not Igniting: Check the Cap, Spark, and Gas Safely
If a Thermador gas-cooktop burner will not ignite, first turn the knob off and decide whether there is any gas odor, hissing, delayed ignition, a pop, smoke, or an abnormal flame. If so, stop using the cooktop, avoid flames and electrical switches, leave the area as appropriate, and follow local gas-emergency guidance; do not keep trying to light it.
-
Thermador Gas Oven Not Igniting
Do not keep trying to light a Thermador gas oven until you know whether gas is reaching the appliance and whether the ignition system is responding. First check the exact model's control state, power, and gas supply without opening the appliance.
-
Thermador Induction Cooktop Not Igniting
A Thermador induction cooktop does not ignite a flame: it activates a cooking zone by detecting suitable magnetic cookware and applying a selected power level. If the zone does not activate, check the visible power state, control lock, dry touch surface, correct zone selection, flat magnetic pan, and any complete error display.
-
Thermador Oven Not Igniting
First identify whether the Thermador appliance is gas, electric, or a dual-fuel range with an oven, because an electric oven does not use a gas igniter. Record the model, selected mode, display state, and exact response: no power, no click or glow, click or glow without flame, a flame that goes out, or a delayed ignition.
-
Viking Cooktop Not Igniting: Check the Safe Cause Before Trying Again
First separate a gas-safety event from a normal ignition fault. If you smell gas, hear hissing, see smoke or sparks, or cannot tell whether gas is flowing, stop immediately, leave the area, avoid flames and electrical switches, and contact the gas supplier or emergency service from a safe location.
-
Viking Gas Cooktop Not Igniting: Check Power, Burner Fit, and Safe Stop Signs
If a Viking gas burner will not ignite, first distinguish no spark from spark without flame. With all controls Off and the cooktop cool, check the external plug or labeled breaker, then inspect only the removable burner cap and head for moisture, spill residue, or incorrect seating.